Pin Gage Sets
- Class ZZ
- Each gage is electro-etched with its actual size.
- Tolerance:
For minus set tolerance : +0.0000″ / -0.0002″
For plus sets tolerance : +0.0002″ / -0.0000″ - All gages are 2″long,centerless lapped.
- Hardness: heat-treated to HRC 60-62.
- Finish: each gage has a 10 microfinish or better.
- Overall length 2″.
Minus tolerance sets
Item | Range | Note |
M0(-) | 0.011″-0.060″x50PCS | |
M1(-) | 0.061″-0.250″x190PCS | |
M1(-)A | 0.061″-0.250″x190PCS | with an Enhanced Aluminum Case |
M2(-) | 0.251″-0.500″x250PCS | |
M2(-)A | 0.251″-0.500″x250PCS | with an Enhanced Aluminum Case |
M3(-) | 0.501″-0.625″x125PCS | |
M4(-) | 0.626″-0.750″x125PCS | |
M5(-) | 0.751″-0.832″x82PCS | |
M6(-) | 0.833″-0.916″x84PCS | |
M7(-) | 0.917″-1.000″x84PCS |
Plus tolerance sets
Item | Range |
P0(+) | 0.011″-0.060″x50PCS |
P1(+) | 0.061″-0.250″x190PCS |
P2(+) | 0.251″-0.500″x250PCS |
P3(+) | 0.501″-0.625″x125PCS |
P4(+) | 0.626″-0.750″x125PCS |
P5(+) | 0.751″-0.832″x82PCS |
P6(+) | 0.833″-0.916″x84PCS |
P7(+) | 0.917″-1.000″x84PCS |