Sale!

wearethenewonlineshopforpht1800portablehardnesstesteraccessorieshldhlghardnesstestblocksprobesforportablehardnesstestersphaseiiplus0.jpg

PHT1800-, Portable Hardness Tester Accessories/HLD-HLG Hardness Test Blocks/Probes for Portable Hardness Testers Phase II Plus

Name: We are the new online shop for PHT1800-, Portable Hardness Tester Accessories/HLD-HLG Hardness Test Blocks/Probes for Portable Hardness Testers Phase II Plus
SKU: mode_7280747806918
Price: 197.50 USD
Availability: InStock

Original price was: $ 658,33.Current price is: $ 197,50.

Impact Devices:

Clear

SKU: mode_7280747806918 Category: Metrology/Material Testing

Portable Hardness Tester Accessories/HLD-HLG Hardness Test Blocks/Probes for Portable Hardness Testers

A full compliment of Accessories for portable hardness testers including:

Impact Devices/Probes and probe attachments
Ring Sets
Portable Hardness Tester Blocks/Hardness Test blocks

Impact Devices:

D-Probe: MODEL NO. PHT1800-100

Universal standard unit. Will handle the majority of hardness testing applications.
Weight:75g

D+15-Probe: MODEL NO. PHT1800-110

Very narrow contact area with a set back measurement coil. This device is used to measure hardness in grooves and recessed surfaces.
Weight: 80g

DL -Probe: MODEL NO. PHT1800-115

This model features a needle front section with a diameter of 4mm and a length of 50mm. It is suitable for testing in extremely confined spaces, the base of grooves and on special components such as as gear wheels. For use on steel and cast steel only!

DC-Probe: MODEL NO. PHT1800-120

Very short impact device for those confined areas, i.e. inside bores for internal measurements. Conforms to the D measuring range. Weight: 50g

G-Probe: MODEL NO. PHT1800-125

This device has an enlarged test tip, and an increased impact energy range (approx. 9 times the D, 72 ft-lb.). Can be used on lower quality finishes for measuring hardness in the Brinell range only (max. 650 HB). Designed to be used with heavy components such as heavy castings and forgings.
Weight: 250g

C-Probe: MODEL NO. PHT1800-130

A reduced impact energy impact device(approximately ¼ of the D Type 2 ft-lb.) for measuring the hardness of surface hardened components, coatings, thin wall or impact sensitive components. Applies a small superficial indentation.
Weight: 75g

Cable for impact devices MODEL NO. PHT1800-102

Technical Data for Portable Hardness Tester Impact Devices

Note: Impact device D is standard device on all models. Specification is identical.

Display type	D/DC/DL	D+15	C	G
Impact energy	11Nmm	11Nmm	3Nmm	90Nmm
Mass of the impact body	5. 5g	7. 8g	3. 0g	20g
	DL: 7.3g
Test tip
* Hardness	1600HV	1600HV	1600HV	1600HV
* Diameter	3mm	3mm	3mm	5mm
* Material		Tungsten	Tungsten
*		carbide	carbide
Impact device
* Diameter	20mm	20mm	20mm	30mm
* Length	147/86mm	162mm	141mm	254mm
* Weight	75/50g	80g	75g	250g
Max. hardness of sample	940HV	940HV	1000HV	650HB
Preparation of surface
* Roughness class ISO	N7	N7	N5	N9
* Max. roughness depth Rt	10 µ m	10 µ m	2.5 µ m	30 µ m
* Average roughness Ra	2 µ m	2 µ m	0. 4 µ m	7 µ m
Min. weight of sample
* Of compact shape	5kg	5kg	1.5kg	15kg
* On solid support	2kg	2kg	0.5kg	5kg
* Coupled on plate	0. 1kg	0. 1kg	0. 02kg	0. 5kg
Min. thickness of sample
* Coupled	3mm	3mm	1mm	10mm
* Min. thickness of layers	0. 8mm	0. 8mm	0. 2mm	–
* Indentation of test tip
* With 300 HV
* Diameter	0. 54mm	0. 54mm	0. 38mm	1.03mm
* Depth	24 µ m	24 µ m	12 µ m	53 µ m
* With 600 HV
* Diameter	0. 45mm	0. 45mm	0. 32mm	0.90mm
* Depth	17 µ m	17 µ m	8 µ m	41 µ m
* With 800 HV
* Diameter	0. 35mm	0. 35mm	0. 30mm	–
* Depth	10 µ m	10 µ m	7 µ m	–

For Testing on Round Parts

12pc Universal Support Ring Set For Portable Hardness Testers

This set is designed to let the user confidently test on round (Concave or Convex) parts. Simple threaded
design for quick change in the shop or out in the field.

MODEL NO. PHT1500-300

Set Consist of:1pc Universal Stand plus the following:

Concave Support Rings

11-13mm round	12.5-17mm round	16.5-30mm round
11-13mm square	12.5-17mm square	16.5-30mm square

Convex Support Rings

10-15mm round	14.5 – 30mm round
10-15mm square	14.5 – 30mm square	25-50mm square

Calibrated Leeb Test Blocks

For all Leeb Portable Hardness Testers

HLD Test Block (for use with all “D” type Impact Devices)

Range: 750-800 (50’s HRC)

Model No. PHT1300-01

Model No. PHT130001-CERT: NIST Certified (HRC)

HLD Test Block (for use with all “D” type Impact Devices)

Range: 590-670 (40’s HRC)

Model No. PHT1300-02

Model No. PHT130002-CERT: NIST Certified (HRC)

HLD Test Block (for use with all “D” type Impact Devices)

Range: 490-570 (20’s HRC)

Model No. PHT1300-03

Model No. PHT130003-CERT: NIST Certified(HRC)

HLD Test Block Double Sided (for use with all “D” type

Impact Devices) Range: 750-800 (60’s HRC)

Model No. PHT1300-05

Leeb Test Blocks for “G” Impact device

HLG Test Block (for use with large “G” Impact Device)

Model No. PHT1100G-01
Model No. PHT1100G-CERT: ASTM Certified(Brinell)

Impact Devices:	D-Probe, D+15-Probe, DL-Probe, DC-Probe, G-Probe, C-Probe, Cable for impact devices

Prompt Delivery and professional packaging

Thanks to our longstanding association with UPS FedEx DHL as well as other major international carriers, we are able to offer a variety shipping options. Our warehouse personnel are extremely skilled and will package your items according to our exact and precise specifications. Your goods will undergo an exhaustive examination before they will be properly packaged prior to being delivered. Everyday, we send to thousands of customers in many countries. The fact that we're dedicated to becoming the largest online retailer in the world is obvious. There are distribution centers as well as warehouses across Europe and the USA.

Orders with more than one item are given processing time in accordance with the item.

Before shipping Our team will conduct an exhaustive inspection of the products you have ordered. Most orders are shipped within 48 hours. The delivery time varies between 3-7 days.

Returns

The stock is dynamic and we do not completely manage it because multiple stakeholders are involved, including our warehouse and factory. This means that the actual stock could fluctuate at any moment. Be aware that your order will be out of stock once your order has been made.

Our policy lasts for 30 days. If it's been more 30 days since you've made your purchase and we're unable to offer you a full exchange or refund.

The item cannot be in use and must be in its original condition. It must also still be in its original packaging.

PHT1800-, Portable Hardness Tester Accessories/HLD-HLG Hardness Test Blocks/Probes for Portable Hardness Testers Phase II Plus

Portable Hardness Tester Accessories/HLD-HLG Hardness Test Blocks/Probes for Portable Hardness Testers

Impact Devices:

D-Probe: MODEL NO. PHT1800-100

D+15-Probe: MODEL NO. PHT1800-110

DL -Probe: MODEL NO. PHT1800-115

DC-Probe: MODEL NO. PHT1800-120

G-Probe: MODEL NO. PHT1800-125

C-Probe: MODEL NO. PHT1800-130

Cable for impact devices MODEL NO. PHT1800-102

Technical Data for Portable Hardness Tester Impact Devices

For Testing on Round Parts

12pc Universal Support Ring Set For Portable Hardness Testers

MODEL NO. PHT1500-300

Concave Support Rings

Convex Support Rings

Calibrated Leeb Test Blocks

Leeb Test Blocks for “G” Impact device

Related products

Login