Sale!

Phase II+, Portable Ultrasonic Hardness Tester w/ 1kg Probe(manual), #PHT-6001 Phase II Plus

Original price was: $ 8.092,00.Current price is: $ 2.023,00.

SKU: mode_5503837143194 Category: Metrology/Material Testing Tags: Metrology/Material Testing, Metrology/Material Testing: Hardness Testers

Description
shopping

Ultrasonic Portable Hardness Tester

UCI/Dynamic Hardness Tester

Series 6000

Non-Destructive Hardness Testing

Features:

Non-Destructive hand held portable hardness tester
Combines UCI and Leeb portable hardness testing in one state of the art device
Test steel with min thickness of .08″ and unlimited max thickness (Other materials may have larger minimum thickness levels, depending on hardness)
Blazing fast test results
Rockwell, Brinell and Vickers hardness test conversions shown on display
Large Memory w/USB Output
Choice of manual UCI probes; 1kg, 2kg, 5kg & 10kg
Optional Motorized Probes: .30kg, .80kg, & 1kgf
Available Impact Devices(Leeb) D, DC, D+15, G & DL

MEASURING METHOD: UCI & Leeb Portable Hardness Testers

There are two basic methods of portable hardness testing that is accepted in the field today.

“Ultrasonic Contact Impedance” is based on a 136 degree diamond at the end of a vibrating rod being depressed into the test surface at a fixed load. The difference in Ultrasonic vibration frequency is then calculated into a hardness value. The UCI hardness test procedure is slower than the Dynamic Impact style, however the “UCI” method of hardness testing is portable, easy and accurate. It also has its own advantages when utilized for certain hardness testing applications. UCI hardness testers are not restricted to large mass items like dynamic type testers. These hardness testers can test metals as thin as 2mm and at a hardness value as low as 20HRC (75HB). They also excel at performing hardness tests on larger, harder metals as well. Another reason for the rise in popularity is due to the fact that the UCI method is categorized as “Non-Destructive”. That translates into less scrap parts/ lower mfg costs due to necessary inspections.

“Dynamic Impact” is based on the Leeb principle of hardness developed by Dietmar Leeb in the 1970’s. A spring loaded impact body is thrust to the test surface, effecting rebound. The speed of both the initial thrust and the rebound is measured in a non-contact mode. This is calculated as a Leeb hardness value and then automatically converted to Rockwell C, B, Brinell, Vickers and Shore hardness Values. It has effectually brought easy, fast and accurate results to portable hardness testing.

UCI Portable Hardness testers

Scales-UCI	Measurement Range	Tolerance
Rockwell C Rockwell B	20-70 HRC 41-99 HRB	+/- 1.5 HRC +/-1.5 HRB
Rockwell A	61-85 HRB	+/-1.5 HRA
Brinell Vickers	76-618 HB 80-1599 HV	+/- 3% HB +/- 3% HV

Can also test in the following scales(UCI only) HRN15 – HRN30 – HRN45 – HRT15 – HRT30 – HRT45 HRF – HK – HD.

LEEB Portable Hardness Testers

Scales-UCI	Measurement Range	Tolerance
Rockwell C Rockwell B	25-67 HRC 59-99 HRB	+/- 1.5 HRC +/-1.5 HRB
Brinell	85-651 HB	+/- 10 HB
Vickers Shore	83-976 HV 26-99HS	+/- 12 HV +/-10HS
Leeb	170-960HLD	+/- 6HL

UCI portable hardness tester w/manual probe

Model No.	Description	Application Notes
PHT-6001	UCI Portable Hardness Tester w/1kgf Probe	For surfaces with Ra below 125?in
PHT-6002	UCI Portable Hardness Tester w/2kgf Probe	For surfaces with Ra below 200?in
PHT-6005	UCI Portable Hardness Tester w/5kgf Probe	For surfaces with Ra below 400?in
PHT-6010	UCI Portable Hardness Tester w/10kgf Probe	For surfaces with Ra below 600?in

UCI portable hardness tester w/motorized probe

Model No.	Description	Application Notes
PHT-6030	UCI Portable Hardness Tester w/.30kgf Probe	Best for checking coating layer hardness; Finished thin parts
PHT-6080	UCI Portable Hardness Tester w/.80kgf Probe	Best for smooth bearing type surfaces
PHT-6100	UCI Portable Hardness Tester w/1kgf Probe	Best for machined surfaces

Specifications:

Hardness Range Scale Selection Tolerance Display Type	HRC: 20.3- 70; HRB: 61-85.6 ; HV: 80-1599; HB: 76-618 Rockwell C (HRC); Rockwell B (HRB); Rockwell A (HRA); Brinell (HB); Vickers (HV); Leeb (HLD) and many more! +/- 3.0% deviation of average from the reference value of the hardness test block with a minimum of 5 tests LCD Color Screen w/Backlight, adjustable brightness
Language Selection Data Logger Data Memory	English, German, Chinese, Spanish, etc. Letters, Numerals 2000 groups of measured data ; 20 groups of calibration data
Statistical Software Data Output	Supplied-can be saved in Word or Excel USB cable supplied
Power Supply Auto Power Off	Rechargeable Lithium Battery: Voltage-4.2V, 4800mAh 5 minutes
Recharging Time Battery Usage	Approx. 8 hours Approx. 6 hours (no backlight)
Net Weight(base unit) Gross Weight	2lbs (w/probe) 12 lbs
Unit Dimensions Gross Dimensions	7.0 x 3.1 x 1.1″(160x80x30mm) 13.7 x 17.7 x 5.9″(350x450x150mm)

Manual UCI Probe Specifications:

Probe Type/Model	PHT-6001	PHT-6002	PHT-6005	PHT-6010
Loading Force	1kgf (10N)	2kg (20N)	5kg (50N)	10kg (98N)
Probe Diameter Length Oscillating Rod Diameter	22mm 154mm 2.4mm	22mm 154mm 2.4mm	22mm 154mm 3mm	22mm 154mm 3mm
Surface Roughness Requirements ?m=Metric ?in= Inch	Ra<3.2?m (Ra<125 ?in)	Ra<5?m (Ra<197 ?in)	Ra<10 ?m (Ra<393 ?in)	Ra<15 ?m (Ra<590 ?in)
Min weight of test sample Minimum thickness of sample	0.3kg (.66lbs) 2mm (.08″)	0.3kg (.66lbs) 2mm (.08“)	0.3kg (.66lbs) 2mm (.08“)	0.3kg (.66lbs) 2mm (.08“)

Motorized UCI Probe Specifications:

Probe Type/Model	PHT-6030	PHT-6080	PHT-6100
Loading Force	.30kg (3N)	.80kg (8N)	1kgf (10N)
Probe Diameter	46mm	46mm	46mm
Length	198mm	198mm	198mm
Oscillating Rod Diameter	3.7mm	3.7mm	3.7mm
Surface Roughness	Ra<3.2?m	Ra<5 ?m	Ra<8 ?m
Requirements ?m=Metric ?in= Inch	(Ra<125 ?in)	(Ra<197 ?in)	(Ra<314 ?in)
Min weight of test sample	0.3kg (.66lbs)	0.3kg (.66lbs)	0.3kg (.66lbs)
Minimum thickness of sample	2mm (.08“)	2mm (.08“)	2mm (.08“)

Indentation Depth (?m)

Hardness	.30kg Motorized	.80kg Motorized	1kg Motorized	1kg Manual	2kg Manual	5kg Manual	10kg Manual
800HV	4	5	7	7	10	15	22
600HV	4	5	8	8	11	18	25
500HV	5	6	9	9	12	19	27
300HV	6	8	11	11	16	25	35
100HV	10	13	19	19	27	43	61

OPTIONAL ACCESSORIES:

Special Application Impact Devices

Impact Device DPart No. PHT1800-100
Universal standard device:

Use for the majority of hardness testing assignments

Impact Device DLPart No. PHT1800-115

Tip 4mm diameter x 1.96″ length Measurements in extremely confined spaces

Impact Device GPart No. PHT1800-125
Enlarged test tip:

For use on solid heavy components such as; rough castings and forgings. Brinell only.

Impact Device DCPart No. PHT1800-120
Extremely short impact device

Used for very confined spaces such as holes, cylinders, internal measurements

Impact Device D+15Part No. PHT1800-110
Slim front section with coil set back

Hardness measurements in grooves, recessed surface

Impact Device CPart No. PHT1800-130
Reduced impact energy

For testing case hardened material

Specifications for impact devices

Impact devices ->	D/DC/DL	D+15	C	G
Impact energy	11Nmm	11Nmm	3Nmm	90Nmm
Mass of the impact body	5.5g	7.8g	3.0g	20g
	DL: 7.2g
Test tip
* Hardness	1600HV	1600HV	1600HV	1600HV
* Diameter	3mm	3mm	3mm	5mm
* Material		Tungsten	Tungsten
*		carbide	carbide
*		carbide	carbide
Impact device
* Diameter	20mm	20mm	20mm	30mm
* Length	147/86mm	162mm	141mm	254mm
* Weight	75/50g	80g	75g	250g
Max. hardness of sample	940HV	940HV	1000HV	650HB
Preparation of surface
* Max. roughness depth Rt	10 µ m	10 µ m	2.5 µ m	30 µ m
* Average roughness Ra	2 µ m	2 µ m	0.4 µ m	6.3 µ m
Min. weight of sample	5kg	5kg	1.5kg	15kg
Min. thickness of sample
* STEEL	25mm	25mm	25mm	25mm
Indentation of test tip
With 300 HV
* Diameter	0. 54mm	0. 54mm	0. 38mm	1.03mm
* Depth	24 µ m	24 µ m	12 µ m	53 µ m
With 600 HV
* Diameter	0. 45mm	0. 45mm	0. 32mm	0. 90mm
* Depth	17 µ m	17 µ m	8 µ m	41 µ m
with 800 HV
* Diameter	0. 35mm	0. 35mm	0. 30mm	–
* Depth	10 µ m	10 µ m	7 µ m	–

Support StandPart No. MET-1000

Small Cylinder Support Ring(8-22mm diameter)

Part No. PHT6000-521

CYLINDER SUPPORT for MOTORIZED PROBE

Part No. PHT6000-751

Deep Hole Probe Cap(5.53mm diameter/15.5 deep)

Part No. PHT6000-541

Optional Hardness Test Blocks for 6000 Series

NIST Certified Hardness Test Block Kit

Part No. 900330-9410

Includes: 1pc HRC 20’s
1pc HRC 40’s
1pc HRC 60’s

Full form cert for each block

Aluminum/Brass Rockwell Blocks

Part No.	Description	Shape	Range	Comments
900330-9414AH	Rockwell B	Square	80’s	Made in USA Aluminum
900330-9414AL	Rockwell B	Square	50’s	Made in USA Aluminum
900330-9418H	Rockwell E	Square	90’s	Made in USA Aluminum
900330-9418L	Rockwell E	Square	60’s	Made in USA Aluminum
900330-9414BH	Rockwell B	Square	80’s	Made in USA Brass
900330-9414BL	Rockwell B	Square	50’s	Made in USA Brass

Leeb Hardness Test Blocks

Part No.	Description	Shape	Range	Comments
PHT1300-01	Leeb “D” Hardness Test Block	Round	750-800(HRC 50’s)	Phase II std.
PHT130001-cert	Leeb “D” Hardness Test Block	Round	750-800(HRC 50’s)	NIST Certified
PHT1300-02	Leeb “D” Hardness Test Block	Round	590-670(HRC40’s)	Phase II std.
PHT130002-cert	Leeb “D” Hardness Test Block	Round	590-670(HRC40’s)	NIST Certified
PHT1300-03	Leeb “D” Hardness Test Block	Round	590-670(HRC40’s)	Phase II std.
PHT130003-cert	Leeb “D” Hardness Test Block	Round	490-570(HRC20’s)	NIST Certified
PHT1100G-01	Leeb “G” Hardness Test Block	Round	480-670	For use with “G” impact devices
PHT1100G-01C	Leeb “G” Hardness Test Block ASTM Certified to Brinell	Round	480-670 (HB200’s)	For use with “G” impact devices

Brinell Hardness Test Blocks

Part No.	Description	Shape	Range	Comments
900355-1000/150	3000kg	Round	150-250	Phase II std. (Steel)
900355-1000/250	3000kg	Round	250-500	Phase II std. (Steel)
900355-3010	3000kg	Rectangle	Low	Aluminum (USA)
900355-3020	3000kg	Rectangle	High	Aluminum (USA)
900355-3030	3000kg	Rectangle	100-200HB	Steel (USA)
900355-3040	3000kg	Rectangle	250-350HB	Steel (USA)
900355-3050	3000kg	Rectangle	500+HB	Steel (USA)

HARDNESS TESTER RESOURCES
REBUILT INVENTORY W/ FULL WARRANTY PHASE II WARRANTY CARD PHASE II SAMPLE EVALUATION SHEETS HARDNESS TESTER CONVERSION CHART PRINCIPLE OF ROCKWELL HARDNESS TESTING ROUNDNESS CORRECTION CHART FOR HARNDESS TESTING	PORTABLE HARDNESS TESTERS MINIMUM THICKNESS CHART FOR ROCKWELL HARDNESS TESTING ROCKWELL HARDNESS SCALE INDENTOR LOAD CHART NIST LINKS NIST SCALE HISTORY ASTM LINKS

Prompt Delivery and professional packaging

Thanks to our longstanding association with UPS FedEx DHL as well as other major international carriers, we are able to offer a variety shipping options. Our warehouse personnel are extremely skilled and will package your items according to our exact and precise specifications. Your goods will undergo an exhaustive examination before they will be properly packaged prior to being delivered. Everyday, we send to thousands of customers in many countries. The fact that we're dedicated to becoming the largest online retailer in the world is obvious. There are distribution centers as well as warehouses across Europe and the USA.

Orders with more than one item are given processing time in accordance with the item.

Before shipping Our team will conduct an exhaustive inspection of the products you have ordered. Most orders are shipped within 48 hours. The delivery time varies between 3-7 days.

Returns

The stock is dynamic and we do not completely manage it because multiple stakeholders are involved, including our warehouse and factory. This means that the actual stock could fluctuate at any moment. Be aware that your order will be out of stock once your order has been made.

Our policy lasts for 30 days. If it's been more 30 days since you've made your purchase and we're unable to offer you a full exchange or refund.

The item cannot be in use and must be in its original condition. It must also still be in its original packaging.